Joins and terminates the underground high-voltage power cables that feed cities, industrial plants, data centers and wind and solar farms. BLS does not publish separate figures for electrical power-line installers and repairers; it counts them within electrical power-line installer and repairer (SOC 49-9051), whose median pay is $95,320 a year (BLS OEWS, May 2025). Typical entry-level education: High school diploma or equivalent.
- SOC 49-9051
- Installation, Maintenance, and Repair
- Last updated October 9, 2026
At a glance
High Voltage Cable Splicer in four numbers
- Median pay
- $95,320a year, or $45.83/hrBLS OEWS, May 2025Lowest 10% $51KTop 10% $129K
US median, all jobs: $50,980
- Projected growth
- +10.3%Much faster than averageBLS EP, 2025–2035This career+10.3%All jobs+3.5%
Projected employment change, 2025–2035 Item Value This career +10.3% All jobs +3.5% - Openings a year
- 10,900131,900 jobs todayBLS EP, 2025–2035
- Jobs in 2025131.9K
- Projected 2035145.5K
Employment, 2025–2035 Item Value Jobs in 2025 131.9K Projected 2035 145.5K - Typical education
- High schoolneeded to enterBLS EP, 2025–2035; mix: O*NET
- Less than high school18.1%
- High school50.3%
- Certificate18.9%
- Some college9.9%
- Professional degree2.8%
Highest education held by electrical power-line installers and repairers Segment Value Less than high school 18.1% High school 50.3% Certificate 18.9% Some college 9.9% Professional degree 2.8%
Also advertised as: Underground Cable Splicer, Journeyman Cable Splicer, Power Cable Splicer, Medium Voltage Cable Splicer.
Pay
How much do Electrical Power-Line Installers and Repairers make?
Every high voltage cable splicer in the US, by percentile of annual wage
Median
$95,320
Middle half earn $67,270 to $109,740
- 10th
- $51,470
- 25th
- $67,270
- 75th
- $109,740
- 90th
- $128,690
All US occupations: $50,980
| Percentile | Value |
|---|---|
| 10th | $51,470 |
| 25th | $67,270 |
| Median | $95,320 |
| 75th | $109,740 |
| 90th | $128,690 |
| All US occupations | $50,980 |
Source: BLS OEWS, May 2025
- Median annual wage
- $95,320
- Median hourly wage
- $45.83/hr
- Mean annual wage
- $91,970
- People employed
- 131,070
Versus all US occupations
At $95,320, Electrical Power-Line Installers and Repairers earn 87% above the $50,980 median across all US occupations, a difference of $44,340 a year.
Versus installation, maintenance, and repair occupations
Inside the Installation, Maintenance, and Repair group, where the middle occupation pays $61,150, this is 56% above the group median.
Pay range
The top 10% earn $128,690 or more while the bottom 10% earn $51,470, a gap of 2.5×. That is a typical spread for a US occupation.
Rank in the bank
This median pays more than 69% of the 1,741 occupations in the NueCareer career bank.
Cost of living
Hawaii posts the highest raw median ($134,340), but once local prices are taken into account Idaho leads at $131,328 in national-average dollars.
Pay by state
Which states pay Electrical Power-Line Installers and Repairers the most?
State medians come from the same OEWS release as the national figures. The cost-of-living column divides each state median by that state's BEA Regional Price Parity, restating pay in national-average dollars so a high-cost state and a low-cost one can be compared directly.
| State | Median | COL-adjusted | Employed |
|---|---|---|---|
| 1Hawaii | $134,340 | $122,182 | 600 |
| 2Washington | $133,060 | $124,340 | 2,340 |
| 3Oregon | $131,090 | $126,827 | 1,640 |
| 4California | $129,040 | $116,546 | 8,930 |
| 5Connecticut | $126,850 | $122,430 | 940 |
| 6Idaho | $125,410 | $131,328 | 860 |
| 7New Jersey | $121,580 | $111,741 | 1,310 |
| 8New York | $121,280 | $112,378 | 5,840 |
| 9Montana | $110,320 | $116,562 | 680 |
| 10Massachusetts | $110,210 | $104,211 | 2,350 |
Job outlook
Is High Voltage Cable Splicer a growing career?
Employment change over 2025–2035, against every US occupation
Much faster than average. +10.3% projected growth vs 3.5% for all occupations.
| Item | Value |
|---|---|
| Electrical Power-Line Installers and Repairers | +10.3% |
| All US occupations | +3.5% |
Source: BLS EP, 2025–2035
Much faster than average
BLS projects employment of Electrical Power-Line Installers and Repairers to change 10.3% over 2025–2035, roughly 2.9× the 3.5% projected for all occupations. That is 13,600 more jobs.
Annual openings
About 10,900 openings are projected each year, 8.3% of the 131,900 jobs that existed in 2025. Most come from workers leaving the occupation, not from growth alone.
Getting in
How to become a High Voltage Cable Splicer
Most splicers come up through a registered apprenticeship. The American Line Builders Apprenticeship Training program, for example, offers cable splicing as one of its dedicated tracks, and many utilities run their own splicer apprenticeships for workers who start as helpers or lineworkers.
Training covers cable construction, splicing kits from manufacturers, grounding, confined space entry for manholes and vaults, and the safety rules in OSHA's 1910.269 standard. Manufacturers of splice and termination kits offer product certification classes, and employers often require them. A high school diploma, mechanical aptitude and very careful hands are the usual starting points.
- 1
Typical entry-level education
High school diploma or equivalent
- 2
Work experience in a related occupation
None
- 3
Typical on-the-job training
Long-term on-the-job training
- 4
Preparation needed (O*NET job zone)
Little or no preparation
BLS Employment Projections, 2025–2035; job zone from O*NET 31.0 Database.
What education people in the job have
O*NET incumbent survey: the highest level of education reported by people already working as electrical power-line installers and repairers.
- High School Diploma or the equivalent (such as a GED)50.3%
- Post-Secondary Certificate18.9%
- Less than a High School Diploma18.1%
- Some College Courses9.9%
- First Professional Degree2.8%
| Item | Value |
|---|---|
| High School Diploma or the equivalent (such as a GED) | 50.3% |
| Post-Secondary Certificate | 18.9% |
| Less than a High School Diploma | 18.1% |
| Some College Courses | 9.9% |
| First Professional Degree | 2.8% |
Source: O*NET 31.0 Database
The work
What does a High Voltage Cable Splicer do?
High voltage cable splicers prepare, join and terminate the insulated power cables that run underground in vaults, duct banks and tunnels. A single splice involves stripping cable layers to precise dimensions, cleaning and shielding, and building up stress cones and insulation so the joint can carry high voltage for decades without failing.
Splicers work for utilities and electrical contractors on city distribution networks, substations, industrial plants and the collection systems of wind and solar farms. They also locate faults, cut out failed sections, test completed work, and install terminations where underground cable rises to overhead lines or switchgear.
Day-to-day tasks
- Prepare high-voltage cable ends by removing jacket, shield and insulation to exact dimensions
- Install splices, stress cones and terminations using manufacturer kits
- Enter manholes and vaults under confined space procedures
- Locate cable faults with test equipment and cut out failed sections
- Test completed splices and cable runs before energizing
- Install grounding and bonding on cable shields
- Read cable maps and circuit drawings to identify the correct circuit
- Pull cable through ducts with winches and rollers
Typical tasks, researched by NueCareer from the sources below.
Working conditions and hours
Splicers spend much of their time in manholes, vaults, trenches and substations, often in tight, hot or wet spaces that require confined space procedures. The work is precise and can take hours for a single joint. Emergency outage calls, night work in city streets and travel to project sites are common.
Where the work happens
Indoors, climate-controlled
NeverEvery dayRarely works in a climate-controlled indoor space.
Outdoors in all weather
NeverEvery dayOutdoors in all weather at least weekly.
Physical demands
Sitting
NeverAlmost all the timeStanding
NeverAlmost all the timeOn their feet more than half the working day.
Bending or twisting
NeverAlmost all the time
Working with people
Contact with other people
NoneConstantConstant contact with other people.
Face-to-face discussions
NeverEvery dayFace-to-face discussions every day.
Dealing with the public
Not importantExtremely important
Pressure and stakes
Strict deadlines
NeverEvery dayMeeting strict deadlines at least weekly.
Conflict situations
NeverEvery dayCost of a mistake
Not seriousExtremely seriousMistakes carry very serious consequences.
Autonomy
Freedom to decide
NoneA lotA lot of freedom to make decisions without checking first.
Conditions: O*NET Work Context survey. Each item has its own scale, so each dot is read against the two answers that end its own line.
Core skills
O*NET importance, 1 to 5
- Active Listening3.4
- Monitoring3.3
- Critical Thinking3.1
- Reading Comprehension3.0
- Active Learning3.0
- Speaking2.9
- Learning Strategies2.8
- Writing2.5
| Item | Value |
|---|---|
| Active Listening | 3.4 |
| Monitoring | 3.3 |
| Critical Thinking | 3.1 |
| Reading Comprehension | 3.0 |
| Active Learning | 3.0 |
| Speaking | 2.9 |
| Learning Strategies | 2.8 |
| Writing | 2.5 |
Source: O*NET 31.0 Database
Transferable skills
O*NET importance, 1 to 5
- Troubleshooting3.4
- Operations Monitoring3.3
- Operation and Control3.3
- Coordination3.1
- Complex Problem Solving3.1
- Repairing3.1
- Quality Control Analysis3.1
- Judgment and Decision Making3.1
| Item | Value |
|---|---|
| Troubleshooting | 3.4 |
| Operations Monitoring | 3.3 |
| Operation and Control | 3.3 |
| Coordination | 3.1 |
| Complex Problem Solving | 3.1 |
| Repairing | 3.1 |
| Quality Control Analysis | 3.1 |
| Judgment and Decision Making | 3.1 |
Source: O*NET 31.0 Database
Tools and software
- Computer aided design CAD software · in demand
- Electronic mail software · in demand
- Office suite software · in demand
- Spreadsheet software · in demand
- Video conferencing software · in demand
- Word processing software · in demand
- Geographic information system
- Mobile location based services software
“In demand” marks an O*NET Employer-Based Hot Technology, software named in real job postings for this occupation.
Personality fit
What personality type suits a High Voltage Cable Splicer?
NueCareer estimate (Holland code RCI) built on O*NET's Electrical Power-Line Installer and Repairer profile, scored 1 to 7
| Axis | High Voltage Cable Splicer |
|---|---|
| Realistic | 7 |
| Investigative | 4 |
| Artistic | 1 |
| Social | 1 |
| Enterprising | 2 |
| Conventional | 5 |
Source: O*NET 31.0 Database
What the work is built around
Day to day this is work built around hands-on, practical work with tools, machines or the outdoors, combined with organising, following procedures and working precisely with data.
- Realistic7.0
- Conventional4.6
- Investigative3.6
- Enterprising1.8
- Social1.3
- Artistic1.0
Closest MBTI types
NueCareer fit scores: cosine similarity between each MBTI type's interest vector and this occupation's O*NET interest profile. Not a BLS or O*NET figure; the method is documented on our methodology page.
Questions
High Voltage Cable Splicer: frequently asked questions
How much do Electrical Power-Line Installers and Repairers make?
BLS does not publish a separate wage for electrical power-line installers and repairers. It counts them within electrical power-line installer and repairer, whose median pay is $95,320 a year (BLS OEWS, May 2025). The middle half of that occupation earn between $67,270 and $109,740, and the top 10% earn $128,690 or more.
Do you need a degree to become a High Voltage Cable Splicer?
No. A bachelor's degree is not the norm: BLS reports a high school diploma or equivalent as the typical entry-level education for Electrical Power-Line Installers and Repairers. BLS also lists long-term on-the-job training as typical on-the-job training. In O*NET's survey of people already doing the job, 50.3% hold high school diploma or the equivalent (such as a ged).
Is High Voltage Cable Splicer a growing career?
Yes, strongly. Employment is projected to grow 10.3% over 2025–2035, more than double the 3.5% projected for all occupations (BLS EP, 2025–2035). BLS still projects about 10,900 openings a year, mostly from workers retiring or moving to other work.
What does a High Voltage Cable Splicer do?
High voltage cable splicers prepare, join and terminate the insulated power cables that run underground in vaults, duct banks and tunnels. A typical task: prepare high-voltage cable ends by removing jacket, shield and insulation to exact dimensions. Employers most often ask for Computer aided design CAD software, Electronic mail software, Office suite software.
Which states pay Electrical Power-Line Installers and Repairers the most?
The highest state medians for Electrical Power-Line Installers and Repairers are Hawaii ($134,340), Washington ($133,060), Oregon ($131,090) (BLS OEWS, May 2025). Adjusted for local prices using BEA Regional Price Parities, Idaho moves to the top at $131,328.
What personality type suits a High Voltage Cable Splicer?
O*NET scores Electrical Power-Line Installers and Repairers highest on the Realistic, Conventional and Investigative interest areas, so the work mixes hands-on, practical work with tools, machines or the outdoors with organising, following procedures and working precisely with data. On NueCareer's MBTI-to-interest mapping that lines up most closely with ISTJ personalities. Personality is a fit signal, not a gate. The free NueCareer quiz scores your own profile against all 1,731 careers in the bank.






