Tunes the software parameters in engine, transmission and electric drive controllers so vehicles meet emissions, fuel economy and drivability targets. BLS does not publish separate figures for automotive engineers; it counts them within automotive engineer (SOC 17-2141), whose median pay is $104,110 a year (BLS OEWS, May 2025). Typical entry-level education: Bachelor's degree.
- SOC 17-2141
- Architecture and Engineering
- Last updated October 9, 2026
At a glance
Automotive Calibration Engineer in four numbers
- Median pay
- $104,110a year, or $50.05/hrBLS OEWS, May 2025Lowest 10% $74KTop 10% $164K
US median, all jobs: $50,980
- Projected growth
- +11.2%Much faster than averageBLS EP, 2025–2035This career+11.2%All jobs+3.5%
Projected employment change, 2025–2035 Item Value This career +11.2% All jobs +3.5% - Openings a year
- 17,800298,500 jobs todayBLS EP, 2025–2035
- Jobs in 2025298.5K
- Projected 2035332K
Employment, 2025–2035 Item Value Jobs in 2025 298.5K Projected 2035 332K - Typical education
- Bachelor'sneeded to enterBLS EP, 2025–2035; mix: O*NET
- Certificate4.8%
- Bachelor's71.4%
- Master's14.3%
- Post-master’s certificate4.8%
- Doctorate4.8%
Highest education held by automotive engineers Segment Value Certificate 4.8% Bachelor's 71.4% Master's 14.3% Post-master’s certificate 4.8% Doctorate 4.8%
Also advertised as: Powertrain Calibration Engineer, Engine Calibration Engineer, Emissions Calibration Engineer, OBD Calibration Engineer, Transmission Calibration Engineer.
Pay
How much do Automotive Engineers make?
Every automotive calibration engineer in the US, by percentile of annual wage
Median
$104,110
Middle half earn $84,130 to $132,590
- 10th
- $73,990
- 25th
- $84,130
- 75th
- $132,590
- 90th
- $164,340
All US occupations: $50,980
| Percentile | Value |
|---|---|
| 10th | $73,990 |
| 25th | $84,130 |
| Median | $104,110 |
| 75th | $132,590 |
| 90th | $164,340 |
| All US occupations | $50,980 |
Source: BLS OEWS, May 2025
- Median annual wage
- $104,110
- Median hourly wage
- $50.05/hr
- Mean annual wage
- $113,610
- People employed
- 296,810
Versus all US occupations
At $104,110, Automotive Engineers earn 104% above the $50,980 median across all US occupations, a difference of $53,130 a year.
Versus architecture and engineering occupations
The median is typical for the Architecture and Engineering group, where the middle occupation pays $104,110.
Pay range
The top 10% earn $164,340 or more while the bottom 10% earn $73,990, a gap of 2.2×. That is a typical spread for a US occupation.
Rank in the bank
This median pays more than 77% of the 1,741 occupations in the NueCareer career bank.
Highest-paying state
New Mexico pays the most at $157,710, and still leads at $171,030 once local prices are taken into account.
Pay by state
Which states pay Automotive Engineers the most?
State medians come from the same OEWS release as the national figures. The cost-of-living column divides each state median by that state's BEA Regional Price Parity, restating pay in national-average dollars so a high-cost state and a low-cost one can be compared directly.
| State | Median | COL-adjusted | Employed |
|---|---|---|---|
| 1New Mexico | $157,710 | $171,030 | 2,710 |
| 2District of Columbia | $133,300 | $121,291 | 510 |
| 3California | $130,900 | $118,226 | 30,530 |
| 4Delaware | $125,130 | $125,371 | 610 |
| 5Colorado | $124,430 | $120,745 | 7,190 |
| 6Alaska | $124,340 | $121,474 | 380 |
| 7Maryland | $122,870 | $117,065 | 6,550 |
| 8Louisiana | $119,540 | $135,522 | 1,890 |
| 9Massachusetts | $119,300 | $112,806 | 7,680 |
| 10Wyoming | $117,750 | $127,035 | 230 |
Job outlook
Is Automotive Calibration Engineer a growing career?
Employment change over 2025–2035, against every US occupation
Much faster than average. +11.2% projected growth vs 3.5% for all occupations.
| Item | Value |
|---|---|
| Automotive Engineers | +11.2% |
| All US occupations | +3.5% |
Source: BLS EP, 2025–2035
Much faster than average
BLS projects employment of Automotive Engineers to change 11.2% over 2025–2035, roughly 3.2× the 3.5% projected for all occupations. That is 33,500 more jobs.
Annual openings
About 17,800 openings are projected each year, 6.0% of the 298,500 jobs that existed in 2025. Most come from workers leaving the occupation, not from growth alone.
Getting in
How to become an Automotive Calibration Engineer
A bachelor's degree in mechanical, electrical or automotive engineering is the standard requirement. Engineers need a solid grasp of combustion or electric machines, control systems and data analysis, and experience on Formula SAE or similar student teams is valued.
Employers train new calibrators on their own processes and tools, and job postings often ask for dynamometer experience and familiarity with EPA and CARB emissions and on-board diagnostics regulations. Knowledge of MATLAB, Python and calibration tools helps.
- 1
Typical entry-level education
Bachelor's degree
- 2
Work experience in a related occupation
None
- 3
Typical on-the-job training
None
- 4
Preparation needed (O*NET job zone)
Medium preparation
BLS Employment Projections, 2025–2035; job zone from O*NET 31.0 Database.
What education people in the job have
O*NET incumbent survey: the highest level of education reported by people already working as automotive engineers.
- Bachelor's Degree71.4%
- Master's Degree14.3%
- Post-Secondary Certificate4.8%
- Post-Master's Certificate4.8%
- Doctoral Degree4.8%
| Item | Value |
|---|---|
| Bachelor's Degree | 71.4% |
| Master's Degree | 14.3% |
| Post-Secondary Certificate | 4.8% |
| Post-Master's Certificate | 4.8% |
| Doctoral Degree | 4.8% |
Source: O*NET 31.0 Database
The work
What does an Automotive Calibration Engineer do?
Calibration engineers set the thousands of tables and values that control how a vehicle's powertrain behaves. Engine calibrators tune fuel injection, spark timing and air handling. Transmission calibrators tune shift points and shift feel. On electrified vehicles, calibrators tune motor torque delivery, regenerative braking and battery management.
The work combines lab and road testing. Engineers run vehicles on dynamometers and in hot, cold and high-altitude conditions, log data, and adjust calibrations with tools such as ETAS INCA or ATI Vision. They also calibrate on-board diagnostics that detect faults and support EPA and California Air Resources Board certification testing. Employers include automakers, suppliers and engineering service firms.
Day-to-day tasks
- Tune engine, transmission or electric drive control parameters
- Run vehicles on dynamometers and record test data
- Calibrate on-board diagnostic monitors for fault detection
- Support emissions and fuel economy certification tests
- Evaluate drivability and shift quality on the road
- Travel for hot, cold and high-altitude calibration testing
- Analyze data to resolve warranty and field issues
Typical tasks, researched by NueCareer from the sources below.
Working conditions and hours
Calibration engineers split time between offices, dynamometer labs and test vehicles. Development trips to extreme climates and high altitudes are common for cold-weather and hot-weather calibration. Most jobs are near automaker technical centers, especially in southeast Michigan.
Where the work happens
Indoors, climate-controlled
NeverEvery dayOutdoors in all weather
NeverEvery day
Physical demands
Sitting
NeverAlmost all the timeStanding
NeverAlmost all the timeBending or twisting
NeverAlmost all the time
Working with people
Contact with other people
NoneConstantFace-to-face discussions
NeverEvery dayFace-to-face discussions every day.
Dealing with the public
Not importantExtremely important
Pressure and stakes
Strict deadlines
NeverEvery dayConflict situations
NeverEvery dayCost of a mistake
Not seriousExtremely serious
Autonomy
Freedom to decide
NoneA lotA lot of freedom to make decisions without checking first.
Conditions: O*NET Work Context survey. Each item has its own scale, so each dot is read against the two answers that end its own line.
Core skills
O*NET importance, 1 to 5
- Critical Thinking4.1
- Reading Comprehension4.0
- Writing3.9
- Speaking3.9
- Mathematics3.9
- Active Listening3.8
- Active Learning3.4
- Science3.3
| Item | Value |
|---|---|
| Critical Thinking | 4.1 |
| Reading Comprehension | 4.0 |
| Writing | 3.9 |
| Speaking | 3.9 |
| Mathematics | 3.9 |
| Active Listening | 3.8 |
| Active Learning | 3.4 |
| Science | 3.3 |
Source: O*NET 31.0 Database
Transferable skills
O*NET importance, 1 to 5
- Complex Problem Solving4.1
- Judgment and Decision Making3.9
- Operations Analysis3.8
- Systems Analysis3.8
- Systems Evaluation3.8
- Coordination3.5
- Time Management3.3
- Persuasion3.1
| Item | Value |
|---|---|
| Complex Problem Solving | 4.1 |
| Judgment and Decision Making | 3.9 |
| Operations Analysis | 3.8 |
| Systems Analysis | 3.8 |
| Systems Evaluation | 3.8 |
| Coordination | 3.5 |
| Time Management | 3.3 |
| Persuasion | 3.1 |
Source: O*NET 31.0 Database
Tools and software
- Analytical or scientific software · in demand
- Computer aided design CAD software · in demand
- Customer relationship management CRM software · in demand
- Data base user interface and query software · in demand
- Development environment software · in demand
- Electronic mail software · in demand
- Enterprise application integration software · in demand
- Enterprise resource planning ERP software · in demand
- File versioning software · in demand
- Graphics or photo imaging software · in demand
- Object or component oriented development software · in demand
- Office suite software · in demand
“In demand” marks an O*NET Employer-Based Hot Technology, software named in real job postings for this occupation.
Personality fit
What personality type suits an Automotive Calibration Engineer?
NueCareer estimate (Holland code IRC) built on O*NET's Automotive Engineer profile, scored 1 to 7
| Axis | Automotive Calibration Engineer |
|---|---|
| Realistic | 6 |
| Investigative | 6 |
| Artistic | 3 |
| Social | 1 |
| Enterprising | 2 |
| Conventional | 4 |
Source: O*NET 31.0 Database
What the work is built around
Day to day this is work built around hands-on, practical work with tools, machines or the outdoors, combined with investigating, analysing and solving problems with ideas and data.
- Realistic6.2
- Investigative5.8
- Conventional4.3
- Artistic2.5
- Enterprising2.1
- Social1.4
Closest MBTI types
NueCareer fit scores: cosine similarity between each MBTI type's interest vector and this occupation's O*NET interest profile. Not a BLS or O*NET figure; the method is documented on our methodology page.
Explore further
Careers related to Automotive Calibration Engineer
O*NET related occupations
- Architecture and Engineering
- Architecture and Engineering
- Architecture and Engineering
- Architecture and Engineering
- Architecture and Engineering
- Architecture and Engineering
More architecture and engineering careers
Median annual pay, with automotive engineers highlighted
- Aerospace Engineer$134,960
- Electrical Engineer$120,630
- Environmental Engineer$107,110
- Mechanical Engineer$104,110
- Automotive Engineer$104,110
- Automotive Calibration Engineer$104,110
- Industrial Engineer$102,440
- Civil Engineer$100,840
- Architect$99,280
| Item | Value |
|---|---|
| Aerospace Engineer | $134,960 |
| Electrical Engineer | $120,630 |
| Environmental Engineer | $107,110 |
| Mechanical Engineer | $104,110 |
| Automotive Engineer | $104,110 |
| Automotive Calibration Engineer | $104,110 |
| Industrial Engineer | $102,440 |
| Civil Engineer | $100,840 |
| Architect | $99,280 |
Source: BLS OEWS, May 2025
Lists Automotive Calibration Engineer appears on
Questions
Automotive Calibration Engineer: frequently asked questions
How much do Automotive Engineers make?
BLS does not publish a separate wage for automotive engineers. It counts them within automotive engineer, whose median pay is $104,110 a year (BLS OEWS, May 2025). The middle half of that occupation earn between $84,130 and $132,590, and the top 10% earn $164,340 or more.
Do you need a degree to become an Automotive Calibration Engineer?
Yes. BLS reports a bachelor's degree as the typical entry-level education for Automotive Engineers, and O*NET rates the preparation needed as medium preparation. In O*NET's survey of people already doing the job, 71.4% hold bachelor's degree.
Is Automotive Calibration Engineer a growing career?
Yes, strongly. Employment is projected to grow 11.2% over 2025–2035, more than double the 3.5% projected for all occupations (BLS EP, 2025–2035). BLS still projects about 17,800 openings a year, mostly from workers retiring or moving to other work.
What does an Automotive Calibration Engineer do?
Calibration engineers set the thousands of tables and values that control how a vehicle's powertrain behaves. A typical task: tune engine, transmission or electric drive control parameters. Employers most often ask for Analytical or scientific software, Computer aided design CAD software, Customer relationship management CRM software.
Which states pay Automotive Engineers the most?
The highest state medians for Automotive Engineers are New Mexico ($157,710), District of Columbia ($133,300), California ($130,900) (BLS OEWS, May 2025).
What personality type suits an Automotive Calibration Engineer?
O*NET scores Automotive Engineers highest on the Realistic, Investigative and Conventional interest areas, so the work mixes hands-on, practical work with tools, machines or the outdoors with investigating, analysing and solving problems with ideas and data. On NueCareer's MBTI-to-interest mapping the closest types are ISTP, ISTJ, INTJ. Personality is a fit signal, not a gate. The free NueCareer quiz scores your own profile against all 1,731 careers in the bank.